Brinkmann PROSERIES Pro Series 2500 User Manual

MAXIMUM SIDE BURNER LOAD = 15 lbs.1. Read and follow all warnings and instructions in owner’s manual before lighting.2. Open lid before lighting burne

LIGHTING INSTRUCTIONS:Follow the instructions exactly.1. OPEN THE GRILL LID before attempting to light a burner so that fumes do not accumulate inside

LIGHTING THE SIDE BURNER:1. Open lid to the side burner before lighting.2. Turn on the side burner by pressing in and rotating thecontrol knob to the

11OPERATING THE GRILL:Never use Charcoal or Lighter Fluid inside your Gas Grill. Read and follow all warnings andinstructions contained in the precedi

ROTISSERIE COOKING:• Your grill was pre-drilled from factory to include mounting holes for a Brinkmann rotisserie (soldseparately). Do not use a rotis

TRANSPORTING AND STORAGE:• Never move a grill when it is hot or when objects are on the cooking surfaces.• Make sure that cylinder valve is shut off.

CLEANING AND MAINTENANCE:• For safe grilling and peak performance of your grill, perform these checks at least twice per year orafter extended periods

TROUBLE SHOOTING:Problem: Possible Causes:• Burner will not light1. Check LP cylinder fuel level.2. Bad electrode spark.Check to see if the grill will

16• To protect your grill from excessive rust, the unit must be kept clean and covered at all times when not inuse. A grill cover may be ordered direc

ASSEMBLY INSTRUCTIONSREAD ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLYBEFORE ASSEMBLING OR OPERATING YOUR GRILL.WE RECOMMEND TWO PEOPLE W

50100200300400500°FOFFHIGHLOWOFFHIGHLOWOFFHIGHLOWOFFHIGHLOWOFFHIGHLOWOFFHIGHLOWMAXIMUM SIDE BURNER LOAD = 15 lbs.1.Read and follow all warnings and in

WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE.THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOURATTENTION TO POSSIBLE HAZAR

198 M6 X 12mm bolts8 M6 X 20mm bolts12 M6 X 50mm bolts1 AA/1.5V Alkaline batteryPARTS CARD CONTENTSMake sure you have all items listed under PARTS LIS

Choose a good, cleared assemblyarea and get a friend to help you putyour grill together. Lay cardboarddown to protect grill finish andassembly area.St

help of a friend, turn the cart over,try to minimize the stress tothe side panels.Step 3Install the wheels as illustrated, byinserting the wheel axle

22Step 6Attach back cart panel by usingfour M6 X 50mm bolts.Note: Leave bolts hand tight untilStep 8.Step 7Attach the grease tray bracket ontothe back

23Note: When performing Step 8, Liftgrill body from front and rearpanels to avoid injury tohands and fingers.Step 8With the help of a friend, place gr

Step 10Insert right side door over lowerpivot (on bottom cart panel) thenalign door with cart frame. Depressspring pin located on top edge ofdoor and

25Step 12Remove the plastic cap on gassupply manifold and attach rubbergas hose to gas supply manifold.Hand tighten first, then usesupplied wrench to

Step 15Insert grill bottom into opening onbackside of grill. Make sure to slidetray onto tracks as illustrated.Step 16Slide grease tray into grease tr

Step 17Place the porcelain coated heatshields on lower level of grill bodyassembly directly above burners.Step 18Place porcelain cast iron cookinggril

28MAXIMUM SIDE BURNER LOAD = 15 lbs.1. Read and follow all warnings and instructions in owner’s manual before lighting.2. Open lid before lighting bur

2WARNING• Never use natural gas in a unit designed for liquid propane gas.• Never use charcoal briquets or lighter fluid in a gas grill.• Leak test al

PROFESSIONAL SHISH-KABOB SKEWERSThese heavy-duty, 18" shish-kabob skewers are extra-long for fabulousrestaurant style kabobs. Made of rust resist

ACCESSORIESLOOK FOR THESE AND OTHER BRINKMANN ACCESSORIES AT YOUR LOCAL RETAILERWHERE SMOKERS ARE SOLD, OR ORDER DIRECT BY CALLING1-800-468-5252.THE U

8/02140-2501-0The Brinkmann Corporation warrants to the original purchaser that the Brinkmann Stainless Steel Pro Series 2500TMisfree from defects due

CYLINDER SPECIFICATIONS:When purchasing or exchanging a cylinder for your gas grill, it must be constructed and marked inaccordance with the specifica

4The cylinder must also be equipped with:• A shut-off valve terminating in a Type 1 gas cylinder valve outlet.• A Type 1 valve that prevents gas flow

FILLING THE LP GAS CYLINDER:• Allow only qualified LP gas dealers to properly fill or repair your LP gas cylinder.• New tanks should be purged prior t

6WARNING• Never use your grill without leak testing all gas connections and hoses. See the section on"Leak Testing" in this manual for prope

LEAK TESTING:To prevent fire or explosion hazard:• DO NOT smoke or permit ignition sources in the area while conducting a leak test.• Perform test OUT

WARNING86. Check each place listed (A -K) for growing bubbles which indicates a leak.7. Turn OFF gas supply at cylinder valve.8. Turn on control knobs