Brinkmann OUTDOOR GAS COOKER User Manual

OWNER’S MANUALASSEMBLY AND OPERATING INSTRUCTIONSOUTDOOR GAS COOKERWARNINGREAD AND FOLLOW ALL WARNINGS ANDINSTRUCTIONS IN THIS MANUAL TO AVOIDPERSONAL

OPERATING INSTRUCTIONSPLACE THE SMOKER OUTDOORS ON A HARD, LEVEL, NON-COMBUSTIBLE SURFACE AWAY FROM ROOF OVERHANG OR ANY COMBUSTIBLE MATERIAL. PLACE T

1. Remove dome lid and smoker body from base pan.2. Light the burner following “Lighting Instructions” section of this manual.3. Place a cooking grill

1. Follow instructions in the “Smoking” section of this manual to set up thesmoker . Light burner following “Lighting Instructions” section in thisman

Adding WoodDuring CookingAdditional flavoring wood should not have to be added during the cooking process,however, it may be necessary when cooking ve

WARNING• Allow liquid in water pan to cool before handling to avoid being burned or scalded.• Always allow the smoker and all components to cool compl

• In some parts of the country, spiders have been found to create flashbackproblems or improper operation of the burner by spinning webs in themixer

140-7047-012/98Owner’s Manual for ModelSmoke’N Grill Gas 810-5600-0For one year from date of purchase, The Brinkmann Corporation warrants the Smoke’N

• Use smoker only on a hard, level, noncombustible, stable surface (concrete, ground, etc.). Never use on wooden or othersurface that can burn.• Alway

• Use a sufficient amount of flavoring wood to avoid having to remove smoker body from base pan during the cookingprocess. This will limit the danger

ASSEMBLY INSTRUCTIONSREAD ALL WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR COOKER.FOR MISSING PARTS, PLEASE CALL CUSTOMER S

STEP 1:a. Turn base pan upside down to assemble. Attach leg brackets to basepan with 10-24 x s" screws and square nuts.NOTE: The two screw holes

STEP 3:a. Install control panel assembly to front of basepan by inserting end of brass extension tubethrough elongated hole in base pan. Attachcontrol

STEP 5:a. Turn burner assembly over in base pan.Insert the end of brass extension tube(that extends inside the base pan) into thehead of burner mixer

STEP 7:a. Attach wooden handle halves to metal brackets using 8-32 x w"screws and nuts as illustrated.b. Attach two handles to sides of smoker bo

GAS LEAK TESTINGTHE GAS LEAK TESTING PROCEDURE MUST BE PERFORMED EVERY TIME THE TANK IS CONNECTED TO SMOKER.WARNING• Gas leak testing must be performe